Pico 160 cel puls

  • activgauss – degaussing during welding
  • Inverter welding machine, DC
  • Welding procedures and functions
  • MMA and pulsed TIG welding
  • MMA welding
  • TIG lift arc welding
  • Cel characteristic
  • Arcforce, hot start, antistick
  • Arcforce and hot start can be set
  • Your benefits
  • Cellulose electrodes: 100% safe for vertical-down welding
  • Unlimited generator operation and connection to long mains leads thanks to high mains voltage tolerances
  • Welding of stick electrodes up to 4 mm
  • Robust design suitable for construction site use
  • Impact-resistant casing
  • Connection capability for remote control
  • Portable, shoulder strap
  • Energy-saving thanks to high efficiency and standby function
  • Very light-weight – casing made of aluminium and impact-resistant plastic
  • IP23 spray water protected
  • Available with open circuit voltage reduction, VRD (to AS 1674.2-2003; IEC/DIN EN 60974-1 and ГОСТ 12.2 007.8)
  • 3.5 m mains lead with 16 A earthed plug
  • Overvoltage protection: No damage to machine caused if inadvertently connected to 400-V mains voltage

Pico 160 Cel Puls

Operating panel PCB

Operation modeOne-knob operation
Welding processMMA
Ignition optionsLiftarc
Pulse TypeAverage value pulse welding
MMA functionsCel
VersionPico 160 Cel Puls
Setting range for welding current5 A – 150 A
Duty cycle 40oC150 A / 30%
120 A / 60%
110 A / 100%
Open circuit voltage94 V
Mains voltage1 x 230 V
Tolerances-40% up to +15%
Mains frequency50 Hz / 60 Hz
Recommended generator power9.9 kVA
Protection classificationIP23
Test mark
EMC ClassA
Dimensions (L x B x H)370mm x 129mm x 236mm
14.6 inch x 5.1 inch x 9.3 inch
Weight4.9 kg
10.8 lbs
StandardsIEC 60974-1 and -10 CL.A