- Modular DC TIG inverter welding machine of the latest generation
- TIG DC and TIG pulse
- activArc® and spotArc®
- MMA, MMA pulse, MMA cel, MMA cel pulse
- Machine configuration ex works:
- Tetrix XQ 230 puls DC with Comfort 3.0 DC machine control, 3.5 m mains cable including mains plug and 5-pole connection socket compatible with EWM X technology
- Tried-and-tested Comfort 3.0 control with two easy-to-read 7-segment displays for simple and fast selection of the most important parameters
- Robust housing with impact-resistant plastic cover
- Provided ex works ready for water block connection – guarantees ultimate flexibility in industry and trade
- Splash-proof in line with IP23
- Temperature- and speed-controlled cooling fan – reduced contamination and less noise emissions as fan only runs when needed
- Generator-compatible, even with long mains leads
- High mains voltage tolerance
- Consumables box in the handle – consumables always safely stored and within reach
- LED status bar indicates the current operating status with colours
- Optional network connectivity with ewm Xnet software via LAN or WiFi gateway
- 3.5 m mains lead with 16 A earthed plug
- Popular, praised and simply indispensable
- Two large, easy-to-read 7-segment displays
- Five favourites buttons
- Click wheel for convenient use with welder’s gloves
- Reliable push-button operation
- Direct access to all main functions
- All parameters at a glance
- AC and DC versions available
| Welding process | TIG |
| DC TIG | |
| MMA DC | |
| E-Hand cel | |
| Operating modes | Non-latched |
| Latched | |
| spotArc | |
| spotmatic | |
| Ignition options | HF |
| Lifarc | |
| Pulse type | Average value pulsing (0.2 Hz – 20 kHz) incl. waveform setting (soft, middle, hard) |
| Thermal pulsing (time pulsing) | |
| Automatic pulsing incl. waveform setting (soft, middle, hard) | |
| MMA functions | Hotstart |
| Arcforce | |
| Antistick | |
| Average value pulse welding | |
| Functions | activArc |
| Automatic gas post-flow function | |
| Cable resistance alignment | |
| Job functions | Number of freely definable Jobs 100 TIG, 8 MMA, 8 MMA cel |
| JOB manager (JOBs can be copied and reset individually, save and load on USB) |
| Setting range for welding current | 3A – 230A |
| Duty cycle 40oC | 230A / 45% |
| 205A / 60% | |
| 170A / 100% | |
| Open circuit voltage | 96V |
| Mains voltage | 1 x 230 V |
| Tolerances | -40% up to +15% |
| Mains frequency | 50 Hz / 60 Hz |
| Recommended generator power | 6.9 kVA |
| Protection classification | IP23 |
| Test mark |  |
| EMC class | A |
| Dimensions (L x B x H) | 550 mm x 224 mm x 415 mm |
| 21.7 inch x 8.8 inch x 16.3 inch | |
| Weight | 17.5 kg |
| 38.6 lbs | |
| Standards | IEC 60974-1, -3 and -10 CL.A |
