Tetrix XQ 230 puls AC/DC Comfort 3.0 8P

  • Modular AC/DC TIG inverter welding machine of the latest generation
  • TIG AC/DC, TIG DC and TIG pulse
  • activArc® and spotArc®
  • MMA, MMA pulse, MMA cel, MMA cel pulse

Machine configuration ex works:

  • Tetrix XQ 230 puls AC/DC with comfort 3.0 machine control, 3.5 m mains cable including mains plug and 8-pole connection socket
  • Tried-and-tested Comfort 3.0 control with twi easy-to-read 7-segment displays for simple and fas selection of the most important parameters
  • Robust housing with impact-resistant plastic cover
  • Provided ex works ready for water block connection – guarantees ultimate flexibility in industry and trade
  • Splash-proof in line with IP23
  • Temperature and speed-controlled cooling fan – reduced contamination and less noise emissions as fan only runs when needed
  • Generator-compatible, even with long mains leads
  • High mains voltage tolerance
  • Consumables box in the handle – consumables always safely stored and within reach
  • LED status bar indicates the current operating status with colours
  • Optional network connectivity with EWM Xnet software via LAN or WiFI gateway
  • 3.5 m mains lead with 16A earthed plug

OW Comfort 3.0 AC/DC

  • Popular, praised and simply indispensable
  • Two large, easy-to-read 7-segment displays
  • Five favourites buttons
  • Click wheel for convenient use with welder’s gloves
  • Reliable push-button operation
  • Direct access to all main functions
  • All parameters at a glance
  • AC and DC versions available
Welding processDC TIG
E-Hand cel
Operating modesNon-latched
AC functionsAC tungsten balling
AC sine
AC trapezoidal
AC rectangle
AC balance
AC amplitude balance
AC frequency: 30 Hz to 300 Hz
Automatic AC frequency
AC commutation optimisation for highest arc stability
Ignition optionsHF
Pulse typeAverage value pulsing (0.2 Hz-20kHz) incl. waveform setting (soft, middle, hard)
Thermal pulsing (time pulsing)
AC special
MMA functionsHotstart
Average value pulse welding
Automatic gas post-flow function
Cable resistance alignment
Job functionsNumber of freely definable Jobs 100 TIG, 8 MMA, 8 MMA cel
Setting range for welding current3A – 230A
Duty cycle 40oC230A / 40%
200A / 60%
170A / 100%
Open circuit voltage96V
Mains voltage1 x 230V
Tolerances-40% up to +15%
Mains frequency50 Hz / 60 Hz
Recommended generator power7.4 kVA
Protection classificationIP23
Test mark
EMC classA
Dimensions (L x B x H)550 mm x 224 mm x 415 mm
21.7 inch x 8.8 inch x 16.3 inch
Weight19.2 kg
42.3 lbs
StandardsIEC 60974-1, -3 and -10 CL.A