Description
With HiFocus neo the user benefits from high speed when cutting and marking electrically conductive materials, ensuring at the same time excellent quality and low process costs. Thanks to the optimised technology, the consumables are handled gently and the plasma cutting process is more efficient.
The plasma cutting unit HiFocus 130 neo achieves best results when marking and cutting materials with a thickness from 0.5 to 40 mm.
Spesification
Power source | HiFocus 130 neo |
Mains voltage* | 3x 400 V, 50 Hz |
Fuse, slow | 50 A |
Connected load, max. | 32 kVA |
Cutting current (at 100% duty cycle) | 20 – 130 A |
Marking current | 16 A |
Cutting range | 0.5 – 40 mm |
Dimensions (L x W x H) | 960 x 540 x 1050 mm |
Weight | 251 kg |
Plasma torch | PerCut 201 / 211 |
*Other voltages and frequencies available upon request.
Technology
- Contour Cut
Exact contours and holes in mild steel with a diameter to material thickness ratio of 1:1 (Diameter:material thickness) - Contour Cut Speed
Contour cutting in mild steel with similar quality and up to 50% higher speed - Silent Cut
Cutting of mild steel with reduced sound pressure level - HiFinox
Plasma cutting of stainless steel and aluminium from 1 to 6 mm with significantly less dross - Ar/H2 Mix
Excellent cutting results thanks to active mixing of single gases for stainless steel and aluminium starting from 6 mm - Marking, notching, punching
Individual labeling of the material
Download