Smart Focus 200


With just a few settings the new plasma cutting units of the Smart Focus series achieve excellent results in the cutting range from 1 to 60 mm. Even under challenging conditions highest cutting quality and speed are realised. In such cases, we use our well-proven cutting technologies, e.g. Contour Cut for cutting mild steel. The optimised gas control units and torches protect the consumables, reduce the gas consumption and the costs per cutting metre. As a further development of the Contour Cut technology the new Silent Cut technology reduces the sound pressure level by up to 15 dB(A) during cutting with currents between 60 and 160 A.

Power sourceSmart Focus 200
Mains voltage*3x 400 V, 50 Hz
Cutting current35 – 200 A
Marking current10 – 50 A
Cutting range
Maximum60 mm
Recommended1 – 40 mm
Piercing30 mm
Plasma gasesO2, Ar / H2, N2, air
PiercingAr, N2
Dimensions (L x W x H)1030 x 680 x 1450 mm
Weight388 kg
Plasma machine torchPerCut 2000
Quick change headPerCut 4000

*Other voltages and frequencies available upon request.

  • Contour Cut
    Exact contours and holes in mild steel with a diameter to material thickness ratio of 1:1 (Diameter:material thickness)
  • Contour Cut Speed
    Contour cutting in mild steel with similar quality and up to 50% higher speed
  • Silent Cut
    Cutting of mild steel with reduced sound pressure level
  • HiFinox
    Plasma cutting of stainless steel and aluminium from 1 to 6 mm with significantly less dross
  • Ar/H2 Mix
    Excellent cutting results thanks to active mixing of single gases for stainless steel and aluminium starting from 6 mm
  • Marking, notching, punching
    Individual labeling of the material

Pure Energy – Smart Focus series

10 mm mild steel