Being the smallest model of the new Q series, the Q 1500 achieves precise plasma cuts at the highest level for material thicknesses of up to 60 mm and with a maximum cutting current of 150 A. Thanks to the modular design, the machine performance of the Q 1500 plus can later be upgraded and, thus, adapted to the customer’s requirements. New components and especially the operator interface Q-Desk meet the complex requirements of a digitalised production in the age of Industry 4.0. The specially developed browser-based operator interface Q-Desk provides real-time process data and information of all plant components on any standard device and location-independent. The user benefits from extensive information enabling him to plan and execute a variety of maintenance tasks as guided by the system. This generation of plasma cutting systems is the result of intensive research and development work by Kjellberg and a landmark in the 60 years of Kjellberg’s plasma history. The new digital plasma series Q sets pioneering standards regarding quality and connectivity.
Power source | Q 1500 / Q 1500 Plus |
Mains voltage* | 3 x (380-400) V / 50 or 60 Hz |
Cutting current (at 100% duty cycle) | 5-150 A |
Marking current (at 100% duty cycle) | 5-50 A |
Cutting range | 0.5-60 mm |
Piercing | up to 30 mm |
Dimensions (L x W x H) | 1100 x 690 x 1430 mm |
Weight | 239 / 280 kg |
Plasma torch | Q-Torch |
Operator interface | Q-Desk |
web-base, platform independent |
*Other voltages and frequencies available upon request.
- Q-Hole
Precise holes in mild steel with a diameter to material thickness ratio of 0.75:1 (Diameter:material thickness) - Q-Mark/Q-Notch
Excellent marking and notching quality - Contour Cut
Exact contours and holes in mild steel with a diameter to material thickness ratio of 1:1 (Diameter:material thickness) - Contour Cut Speed
Contour cutting in mild steel with similar quality and up to 50% higher speed - Silent Cut
Cutting of mild steel with reduced sound pressure level - HiFinox
Plasma cutting of stainless steel and aluminium from 1 to 6 mm with significantly less dross - Ar/H2 Mix
Excellent cutting results thanks to active mixing of single gases for stainless steel and aluminium starting from 6 mm - N2 Plasma Cutting
Plasma cutting of stainless steel and aluminium up to 60 mm