Wega 601 FDW

Wega 601 FDW
  • MIG/MAG standard welding machine, step switch controlled, water-cooled
  • 4-roll drive. Equipped for 1.0 mm + 1.2 mm steel wires
  • Powerful cooling system with centrifugal pump, pressure switch and 7 l tank. Temperature-controlled pump and fan
  • 5 m mains supply lead
 Wega 601 FDW
MIG/MAG
Setting range for welding current 50 A - 600 A
Duty cycle at ambient temperature 25 °C 40 °C
60 % - 600 %
70 % 600 A -
100 % 450 A 450 A
Open circuit voltage 60V
Mains frequency 50 Hz / 60 Hz
Mains fuses (slow-blow) 3 x 32 A
Mains voltage (tolerances) 3 x 400 V (-15 % - +15 %)
Max. connected load 36.7 kVA
Recommended generator power 50 kVA
cos φ 0.97
Switching Step 36 (12x3)
Cooling Output 1200 W (1l/min)
Tank Capacity 7 l
Dimensions machine, LxWxH in mm 960 x 560 x 1010
Wire feeder, LxWxH in mm -
Weight, machine 228 kg
Flow Rate 5 l/min
Protection classification IP 23
Insulation class H
Torch connection Euro torch connector
Standards IEC 60 974-1; -10 / CE / S-Safety sign / EMC class A
  • Selection of the welding task from the JOB list
  • Setting of all welding parameters and welding data displays on the wire feed unit or on compact welding machine
  • Setting of the welding parameters via welding sequence with LED user menu
  • No settings required on decompact welding machine
  • Highlights
  • Easiest possible selection of the preset JOBs (welding tasks) for the different materials, gas types and wire diameters via JOB list
  • Synergic – one-knob operation
  • forceArc, rootArc and standard and pulse MIG/MAG welding with solid and flux cored wire, MMA and TIG lift arc welding, air arc gouging