Tetrix 300 AC/DC Comfort 2.0 puls 5P TM

Tetrix 300 AC/DC Comfort 2.0 puls 5P TM
  • Modular AC/DC TIG inverter welding machine, gas- or water-cooled
  • Comfort 2.0 control, simple operation with click wheel
  • TIG welding
  • Features characteristics for EWM activArc and EWM spotArc at no extra charge
  • Electronic HF start
  • TIG lift arc welding without HF
  • Special AC welding procedure to join markedly different aluminium plates together, e.g. welding 1-mm-sheet to a 10-mm-plate
  • Adjustable AC waveform, sine, trapezoidal, square current
  • Adjustable AC frequency between 30 Hz and 300 Hz
  • Adjustable AC balance, pulse balance
  • Automatic AC frequency
  • TIG average value pulsing: the preset welding current is maintained at all times, so particularly suitable for welding as per welding procedure specification
  • TIG automated pulsing with automatic specification of required pulse parameters
  • Pulsed TIG welding in Hz and kHz range up to 15 kHz
  • 100 free memory locations for recurring welding tasks (JOBs)
  • Non-latched/latched operation
  • Reduced secondary current accessible using torch trigger
  • Spot welding/tack function (spotArc/spotmatic)
  • Adjustable up-slope and down-slope time
  • Adjustable gas pre- and post-flow time
  • MMA welding
  • MMA average value pulsing
  • AC electrode welding
  • 100 free memory locations for recurring welding tasks (JOBs)
  • Adjustable hot start current and hot start time
  • Adjustable Arcforce
  • Antistick function
  • Highlights
  • Gas-cooled or optionally water-cooled with cool 41 U31 cooling unit
  • Energy-saving thanks to high efficiency and standby function
  • Excellent torch cooling, resulting in cost savings on consumables due to high-performance centrifugal pump and 4-litre water tank (cool 41U31 cooling unit)
  • Connection capability for remote control and function torch
  • Trolly 35.2-2, Trolly 55-5 and Trolly 55-6 trolleys available
  • Optional network connectivity with ewm Xnet software via LAN or WiFi gateway
  • PC interface for PC300 XQ software
TIG MMA
Setting range for welding current 5 A - 300 A 5 A - 300 A
Duty cycle at ambient temperature 40 °C
30 % 300 A
35 % 300 A
60 % 260 A
100 % 210 A
Open circuit voltage 63 V
Mains frequency 50 Hz / 60 Hz
Mains fuses (slow-blow) 3 x 16 A
Mains voltage (tolerances) 3 x 400 V (-25 % - +20 %)
Max. connected load 11.7 kVA 17 kVA
Recommended generator power 15.8 kVA 23 kVA
cos φ 0.99
Efficiency 84 %
Dimensions machine, LxWxH in mm 539 x 210 x 415
Weight, machine 22.6 kg
EMC class A
Insulation class H
Protection class IP23
Approvals S sign , CE sign , EAC sign
Standards IEC 60974-1, -3 and -10 CL.A
No Data