Taurus 355 Basic TKW

Taurus 355 Basic TKW
  • Manual twin-knob operation (welding voltage and wire feeding)
  • Suitable for GMAW welding of steel/CrNi/aluminium at no extra charge
  • Infinitely adjustable arc dynamics (choke effect)
  • Large power reserves through long duty cycle and therefore less heating of all components guarantee in practice a longer service life of machines
  • Electricity savings thanks to highly efficient performance and standby function
  • Easy, tool-free change of welding polarity
  • High mains voltage tolerances +20%/-25% and therefore fully generator-compatible
  • Connection capability for remote control and function torch
  • Excellent torch cooling and therefore cost saving on consumables due to high-performance centrifugal pump and 6 litre water tank
  • Trolly 55-5 trolley optionally available
  • Wire spool diameter up to 300 mm/D3, 200 mm/D2 possible with adapter
  • Suitable for MMA welding and gouging at no extra charge
  • High-precision, powerful EWM eFeed 4-roll wire feed mechanism for secure feeding of all solid and flux cored wires up to 2.4 mm
  • Earth fault monitoring (PE protection)
  • IP23 spray water protected
Taurus 355 Basic TKW
MIG/MAG TIG MMA
Setting range for welding current 5 A - 350 A 5 A - 350 A 5 A - 350 A
Duty cycle at ambient temperature 25 °C 40 °C 25 °C 40 °C 25 °C 40 °C
40 % - 350 A 350 A 350 A
60 % - 300 A 300 A 300 A
100 % - 270 A 270 A 270 A
Open circuit voltage 80 V
Mains frequency 50 Hz / 60 Hz
Mains fuses (slow-blow) 3 x 16 A
Mains voltage (tolerances) 3 x 400 V (-25 % - +20 %)
Max. connected load 12.7 kVA 9.7 kVA 13.8 kVA
Recommended generator power
13.1 kVA 17.2 kVA 18.7 kVA
cos φ 0.99
Efficiency 88 %
Dimensions machine, LxWxH in mm 625 x 300 x 810
Weight, machine 49 kg
Protection classification IP 23
Insulation class H
Torch connection Euro torch connector
Standards IEC 60 974-1; -10 / CE / S-Safety sign / EMC class A
  • Selection of the welding task from the JOB list
  • Setting of all welding parameters and welding data displays on the wire feed unit or on compact welding machine
  • Setting of the welding parameters via welding sequence with LED user menu
  • No settings required on decompact welding machine
  • Highlights
  • Easiest possible selection of the preset JOBs (welding tasks) for the different materials, gas types and wire diameters via JOB list
  • Synergic – one-knob operation
  • forceArc, rootArc and standard and pulse MIG/MAG welding with solid and flux cored wire, MMA and TIG lift arc welding, air arc gouging