HiFocus 440i Plus

HiFocus 440i Plus

Plasma Cutting System HiFocus 440i Plus

• At present most powerful high-precision plasma cutting system worldwide
• Incomparable flexibility for CNC-controlled cutting of all electrically conductive materials up to 120 mm dry as well as underwater
• Recommended cutting range from 0.5 up to 60 mm for mild steel and from 1.0 up to 80 mm for stainless steel
• Maximum Piercing 50 mm
• Cutting, marking, notching and punching without change of plasma torch and consumables, by using the plasma gas control unit FlowControl
• CNC-controlled cutting with plasma machine torch and optional use of oxygen, nitrogen or argon/hydrogen as plasma gas
• Flexible adaption to 2D and 3D CNC guiding systems like robots, profile cutting machines and pipe cutting machines
• Contour Cut guarantees high repeatability and dimension accuracy of the cut parts
• Low squareness and inclination tolerances of the cut surfaces, nearly no rework required
• Precise contours when cutting sharp edges and small radii
• Cutting of holes with small diameters in mild steel with the Contour Cut technology
• High lifetime of consumables due to dual gas ignition and nozzle saving piercing with swirl gas technology
• Ideal plasma cutting system for steel service centres, steel producers and distributors

Contour Cut and Contour Cut Speed

• Optimized plasma cutting technologies for cutting contours in mild steel
• Precise plasma cutting of small contours and holes 1:1 with Contour Cut
• Cutting of large contours up to 50 % faster with Contour Cut Speed
• High cut quality and contour accuracy
• Reduced angular deviations and improved quality of cut surfaces
• Very high repeatability and dimension accuracy
• No time-consuming after-treatment – high productivity at low costs
• Standard for all HiFocus systems – no further equipment

Plasma Torch PerCut 441/451

• Plasma machine torch PerCut 441 for standard applications as well as for high-precision bevel cutting
• Quick-change torch PerCut 451M with thread for a quick and handy installation of the torch
• Quick-change torch PerCut 451A with bayonet coupling for automated change with ATChanger
• Flexible use between 5 A and 440 A with only one torch head
• Improved lifetime of consumables thanks to the YellowXLife® technology
• Significantly lower gas consumption compared to competitive products due to effective liquid cooling system up to the nozzle tip
• Bevel cutting up to 50 degrees with standard consumables
• Cutting and marking with the same consumables

Gas Control Units

• Manual all-gas control unit PGE-360 for cutting all metals
• Automatic plasma gas control unit FlowControl consisting of plasma gas valve unit (PGV) and plasma gas controller (PGC) for automatic gas flow control according to the material quality and thickness via databases installed in the PGC or the CNC guiding system.

 

 POWER SOURCE   HiFocus 440i
         
Mains Voltage   3 x 400 V; 50 Hz    
Cutting Range    Mild Steel    Stainless Steel      
  • Maximum
  120 mm    120 mm      
  • Recomended
  0.5 – 60 mm    1.0 – 80 mm      
Connecting Power ( At 250 A )   127 kVA        
Mains fuses(slow-blow)   200 A
Mains frequency   50 Hz / 60 Hz
Protection Class   IP 22
Open Circuit Voltage   330 V ( DC )
Weight 517 kg
Cutting Current 10 – 440 A (100% ED)
Cooling Kjellfrost
Dimensions( LxWxH ) 1030 x 680 x 1450 mm
 Max Piercing   50 mm
 Marking Current 5 – 50 A (100% ED)
 Plasma machine torch PerCut 441
Quick-change torch PerCut 451M / PerCut 451A
Clamping diameter  50.8 mm
Plasma gases O2, Ar/H2, N2/H2 (F5), Air
Marking gases Ar
Swirl gases O2, N2, Air
   
No Data