- Stabilized welding arc and low spatter at all output range. It is suitable for both root welding at low current and filling welding of high deposition efficiency at high current.
- Strong penetration with concentrated welding arc. Heat input is lowered by 20% with smaller heat deformation for the same depth of penetration.
- Outstanding performance in gap-filling welding with low sensitivity to wire stick-out; suitable for various welding positions and unskilled welders.
- Dynamic droplet inspection and micro-control technology, which cuts output power immediately after the last metal transfer. The wire tip will be cleared to reduce time for ball-cleaning at situations of high quality welding. Better production efficiency can be ensured thanks to the higher success ratio of one-time ignition.
- Direct achievement of locking-up with a password, multiple welding parameters, even extended functions thru the hot keys on the front panel, without any necessity and extra cost of additional equipment.
- Default set of 10 welding parameters for both saving and activating. 99 sets are allowed at maximum for tailored design.
- Analog communication with robot as optional.
Specification
Ehave CM 400 | |
|---|---|
Control Mode | Full Digital-Control |
Rated Input Voltage | AC 3PH 380V +/-25% (3PH 285V ~ 3PH 475V) |
Input Frequency | 30 ~ 80 Hz |
Rated Input Power | 16.8KVA |
Power Factor | 0.94 |
Efficiency | 86% |
Rated OCV | 63.7V |
Rated Output Current | 30 ~ 400 A |
Rated Output Voltage | 12 ~ 45 V |
Duty Cycle | 400A 100% @ 40oC |
Applicable Material | Carbon Steel |
Welding Process | CO2 / MAG / FCAW / MMA |
Wire Diameter | φ 0.8 / 1.0 / 1.2 mm |
Welding Operation Mode | 2T / 4T / Repeated 4T / Spot Welding |
Parameter Channel | 10 (standard) |
Inductance Scope (Soft / Strong Arc) | -9 ~ +9 |
Communication with Robot Controller | Analog |
Reserved Communication Interface | CAN |
Cooling Mode | Intelligent Air Cool |
Wire-feeding Speed | 1.4 ~ 24 m/min |
Electromagnetic Compatibility | IEC60974:10 EMS |
Insulation Grade | H |
Ingress Protection | IP 23S |
Protection Against Lightening | Class D (6000V/3000A) |
Working Temperature & Humidity | -39oC ~ +50oC ; Humidity ≤ 95%; |
Dimension (L / W / H) | 620 x 300 x 480 mm |
Gross Weight | 48 KG |
Related Products
