Plasma Cutting System CUTLINE 20W
For cutting of all electrically conductive materials up to 20 mm material thickness with water-cooled plasma hand torch PHT-30 W/L
- with plasma gas air
- and for plasma gouging
- Excellently suitable in industry and craft, in small and medium-size companies and training Centre’s, for repairs and on construction sites
- Suitable for straight, profile, template and bevel cutting in all positions, for piercing, for hole and slot cutting as well as for plasma gouging.
Power Source CUTLINE 20W
- 2 cutting current steps: 25 and 50 A
- Plasma hand torch with central connector (length 6 m)
- Integrated water cooling for high lifetime of consumables with monitoring by flow indicator
- Oil and water separator as well as adjustment of plasma gas pressure by reducer/cleaner on rear wall
- Safe pilot-arc ignition by high-voltage impulses
- Running cutting start and running piercing possible, no reference point necessary
- Automatic power increase of the pilot arc at work piece contact
- by direct and effective cooling of plasma torches the lifetime of nozzles and cathodes is up to 6 times higher
- Soft start circuit at cutting start and piercing increases the life time of nozzles and cathodes additionally
- Air consumption reduced by ca. 80% compared with air-cooled plasma torches
- no wear of torch body due to cooling of the consumables at the location of the heat generation
- High labour safety due to protection against accidental contact by safety shut-down at the hand torch
- Control of the plasma gas and the thermal load of the plasma cutting system
Optional Accessories
- Plasma hand torch with central connector (10 m), other lengths on request
- Plasma tractor FE 1 for mechanised cutting of straight cuts (track available) and circles
- Circle attachment with magnetic or suction holder
- Wheel guide (ensures constant distance between torch and work, also for save cutting of contours)
- Bevel cutting attachment for cutting of any bevel for welding seam preparation
- Distance cap for template cutting
- Distance bow and distance cap for constant distance between nozzle and work piece
POWER SOURCE | CUTLINE 20 W | ||||||
Connecting Power | 16 kVA | ||||||
Cutting Range | |||||||
|
20 mm | ||||||
|
1.0 mm -15 mm | ||||||
Dimensions (L x W x H) | 670 x 490 x 880 mm | ||||||
Main Voltage | 3 x 230/400 V | ||||||
Mains frequency | 50 Hz / 60 Hz | ||||||
Mains fuses (slow-blow) | 35 A / 25 A | ||||||
Weight | 84 Kg | ||||||
Open Circuit Voltage | 275 V | ||||||
Duty Cycle | 50% | ||||||
Cutting Current | 25 A/ 50 A | ||||||
Protection Class | IP 22 | ||||||
Plasma Torch | PHT-30 W/L | ||||||
Plasma gases | Air, N2 | ||||||
Cooling | Kjjelfrost | ||||||
Pressure | 0.4 - 0.5 MPa | ||||||
Plasma gas consumption | 26 l/Min | ||||||
Manufactured on the basis of the standard EN 60974 | |||||||
CE sign, Manufacture according to DIN EN ISO 9001 | |||||||
S sign, applicable to environments with increased hazard of electric shock |
No Data