CUTi 70

CUTi 70

Plasma Cutting Inverter CUTi 70

  • Plasma cutting up to 30 mm material thickness with air cooled plasma torch
  • Cutting of all electro-conductive materials with
  • Plasma gas air
  • Mains connection 3 x 400 V, 50/60 Hz
  • Plasma torch with central connector
  • Excellently suitable in crafts, in small and medium-size companies and training centers, for repairs and on construction sites
  • Suitable for straight, profile, template and bevel cutting in all positions, for piercing, for hole and slot cutting

Power Source CUTi 70

  • Stepless adjustable cutting current from 26 A up to 70 A for optimal current adaptation to the cutting job
  • Constant power output also in case of line variations
  • Technique: Cutting with spacer spring, with contact cap, with beveling cap or with long consumables for cutting at inaccessible parts of work piece
  • Safe pilot-arc ignition by high-voltage impulses
  • Plasma torch KjellCut 70 with central connector (length 6 m) – easily removable after use
  • Running cutting start and running piercing possible, no reference point necessary
  • Automatic power increase of the pilot arc at work piece contact
  • Filter regulator (protected through cover) used as oil and water separator as well as justification of plasma gas pressure when using an external compressor
  • Work piece cable pluggable for easy transportation
  • Suitable for electronically controlled power generating sets (min. 18 kVA)
  • Consumable kit is standard (contains 3 nozzles, 3 cathodes, spatter protection, contact cap, 2 spacer spring, beveling cap, multiple wrench, safety wrench for central socket)
  • High labor safety by shock-proof with safety shut-down at cutting with hand torch
  • Control of the plasma gas and the thermal load of the plasma cutting system

Optional accessories

  • Circle cutting attachment for diameter 100 – 1,000 mm, included wheel guide; ensures constant distance between torch and work piece, also for safe cutting of contours
  • Bevel cutting attachment, stepless adjustable, for example for welding seam preparation

 

 POWER SOURCE   CUTi 70
         
Connecting Power   11.1 kVA    
Cutting Range              
  • Maximum
  30 mm          
  • Recomended
  0.5-25 mm          
Dimensions (L x W x H)   470 x 180 x 250 mm          
Main Voltage   3 x 400 V +PE
Mains frequency   50 Hz / 60 Hz
Mains fuses (slow-blow)   16 A
Weight   16.4 Kg
Open Circuit Voltage   270 V ( DC )    
Duty Cycle 25% at 70 A60% at 60 A100 % at 50 A
Cutting Current   26 - 70 A
 Protection Class    IP 21
     
Plasma Torch   KJJELCUT 70
Plasma gases   Air
Pressure   0.5 MPa ( 5 Bar )
Plasma gas consumption   140 l/min
     
     
    Manufactured on the basis of the standard EN 60974
    CE sign, Manufacture according to DIN EN ISO 9001
    S sign, applicable to environments with increased hazard of electric shock
No Data