CUTi 90

CUTi 90

Plasma Cutting Inverter CUTi 90

  • Plasma cutting up to 35 mm material thickness with air cooled plasma torch
  • Cutting of all electro-conductive materials with plasma gas air
  • Plasma torch with central connector
  • For crafts and medium-sized enterprises
  • Suitable for straight, profile, template and bevel cutting in all positions, for piercing, for hole and slot cutting.

Power Source CUTi 90

 

  • Stepless adjustable cutting current from 26 up to 90 A for optimal current adaptation to the cutting job
  • Constant power Output also in case of line variations
  • Technique: Cutting with spacer spring, with contact cap, with bevelling cap or with long consumables for cutting at inaccessible parts of Workspace
  • Safe pilot-arc ignition by high-voltage impulses
  • Plasma torch KjellCut 120 with central connector (length 6 m) – easily removable after operation
  • Running cutting start and running piercing possible, no reference point necessary!
  • Automatic power increase of the pilot arc at work piece contact
  • Filter regulator (protected through cover) used as oil and water separator as well as justification of plasma gas pressure when using an external compressor
  • Work piece cable pluggable for easy transportation
  • Suitable for electronically controlled power generating sets (min. 22 kVA)
  • Consumable kit is standard (contains 5 nozzles, 3 cathodes, spatter protection, contact cap, 2 spacer spring, bevelling cap, multiple wrench, safety wrench for central socket)
  • High labor safety by shock-proof with safety shut-down at cutting with hand torch
  • Control of the plasma gas and the thermal load of the plasma cutting system

Optional Accessories

  • Circle cutting attachment for diameter 100 – 1.000 mm, included wheel guide; ensures constant distance between torch and work piece, also for safe cutting of contours
  • Bevel cutting attachment, stepless adjustable, for example for welding seam preparation
  • Plasma torch length 12 m

 

 

 POWER SOURCE   CUTi 90
         
Connecting Power   15 kVA    
Cutting Range              
  • Maximum
  30 mm          
  • Recomended
  0.5-25 mm          
Dimensions (L x W x H)   470 x 180 x 250 mm          
Main Voltage   3 x 400 V +PE
Mains frequency   50 Hz / 60 Hz
Mains fuses (slow-blow)   25 A
Weight   17 Kg
Open Circuit Voltage   250 V ( DC )    
Duty Cycle 40% at 90 A60% at 74 A 100 % at 55 A
Cutting Current   26 - 90 A
 Protection Class    IP 21
     
Plasma Torch   KJJELCUT 120
Plasma gases   Air
Pressure   0.5 MPa ( 5 Bar )
Plasma gas consumption   195 l/min
     
     
    Manufactured on the basis of the standard EN 60974
    CE sign, Manufacture according to DIN EN ISO 9001
    S sign, applicable to environments with increased hazard of electric shock
No Data