CUTi 35C

CUTi 35C

Plasma Cutting Inverter CUTi 35C

  • Plasma cutting up to 10 mm material thickness (mild steel) with air cooled plasma torch
  • Inbuilt compressor allows cutting without external Air-supply up to 6 mm
  • Cutting of all electro-conductive materials with plasma gas air
  • Firmly mounted torch PHT 25, length 4 m
  • Excellently suitable in crafts, in small and medium-size companies and training centres, for repairs and on construction sites
  • Suitable for straight, profile, template and bevel cutting in all positions, for piercing, for hole and slot cutting

Power Source CUTi 35C

  • Stepless adjustable cutting current from 12 A up to 25 A (use of inbuilt compressor) respectively 12 A up to 35 A (use of external compressed air) for optimal current adaptation to the cutting job
  • Constant power output also in case of line variations
  • Safe pilot-arc ignition by high-voltage impulses
  • automatic switch OFF of inbuilt compressor during connection of external air supply
  • Running cutting start and running piercing possible, no reference point necessary
  • Automatic power increase of the pilot arc at work piece contact
  • Filter regulator (protected through cover) used as oil and water separator as well as justification of plasma gas pressure when using an external compressor
  • Suitable for electronically controlled power generating sets (min. 12 kVA)
  • Consumable kit is standard (contains 3 nozzles, 3 cathodes, splatter protection)
  • Control of the plasma gas and the thermal load of the plasma cutting system.
 POWER SOURCE   CUTi 35C
         
Connecting Power   3.3 kVA [4.8 kVa1]    
Max.  Cutting Range              
  • With external use of compressed air
  10 mm          
  • Using inbuilt compressor
  6 mm          
Dimensions (L x W x H)   550 x 150 x 245 mm          
Main Voltage   1 x 230 V
Mains frequency   50 Hz / 60 Hz
Mains fuses (slow-blow)   16 A
Weight   12.5 Kg
Open Circuit Voltage   270 V ( DC )    
Duty Cycle   25% at 35 A 35 % at 25 A100 % at 20 A
Cutting Current   12 – 25 A [12 – 35 A1]
 Protection Class    IP 23
     
Plasma Torch   PHT-25
Plasma gases   Air
Pressure 0.4 MPa ( 4 Bar )
Plasma gas consumption   115 l/min
     
     
    Manufactured on the basis of the standard EN 60974
    CE sign, Manufacture according to DIN EN ISO 9001
    S sign, applicable to environments with increased hazard of electric shock
No Data